Safe use of electric heating

    (1) using a three-hole socket or standard
    Plug-in board electrical room heaters due to the large power, the use must pay attention to grasp the safety details. Use a grounded device with a three-hole socket with a ground wire. Do not replace the two-hole socket without ground to prevent danger. If the use of dragline socket, the best choice with over-current protection device standard plug-in board, and the socket line is the use of "GB" 2.5 ~ 6.0m2 copper wire. In addition, the heater should be as far away as possible from the socket to prevent fire.
    (2) electric heater bogey, inverted
    Electric heater must be placed upright use, can not be inverted. Because the oil heater is through the bottom of the heating pipe on the surrounding heat conduction oil heating, so that the heat transfer oil flow in the diversion tube to heat, if the inverted, flat or inclined, it will cause air burning, the heat pipe burn Bad.
    (3) indoor electric heaters should not cover items
    If you cover the items in the heater, easy to heat the heater can not be distributed in a timely manner caused by burning machine. If you use the heater for the drying rack, be sure to dry the clothes of the water, to avoid falling water drops in the electrical control box.
    (4) the correct scrubbing electric heating appliances, it is best to use a soft cloth dipped in household detergent or soapy water to wipe, can not use gasoline and other dilution solvent, so as to avoid damage to the shell or electrical rust, affecting its performance and beautiful.
    (5) should be used immediately when an accident occurs
    When using the heater, such as the discovery of oil spills, abnormal sound, etc., must immediately stop using, unplug the power supply, timely contact with the manufacturer maintenance department, please repair professionals, do not disassemble themselves.